REVIVE™
Rejuvenate plastic and trim
Automotive, Commercial Fleet, Aviation, and Marine
- System X Revive™ is a high performer against UV light and fading.
- It rejuvenates plastics and trims, bringing them back to life and protecting them from future UV fading and wear.
- This product is known to bring out the deepest blacks of factory trims and vehicle plastics while transforming old, faded parts to like new.
- System X Revive™ acts just like our other ceramics, providing ultra-hydrophobic properties and protection.
- Tailored to the Automotive, Commercial Fleet, Aviation, and Marine industries.
- Fast & easy application process.
- Effective for 2 years depending on environmental factors.
How to apply:
- If contaminated, use a clay bar to clean. If paint correction is required, do so before application.
- Wash and completely dry surfaces to be coated.
- Clean the trim/plastic using a 50% IPA (isopropyl alcohol) to water mix in a trigger sprayer. Mist the paint then wipe down with a microfiber towel.
- Wipe on coating by hand using a sponge or coating block, piece by piece. After wiping on wait 10-30 seconds to flash (depending on temp) then buff off with a microfiber towel.
- Wait 20 minutes before driving, and 6 hours before getting wet.
Additional information
| Weight | 0.18 lbs |
|---|---|
| Dimensions | 1.15 × 1.5 × 4 in |
| Size | 20 ml, 65 ml |