RENEW™
True SiO2 technology – formed in chemical matrix during cure
Automotive, Commercial Fleet, Aviation, and Marine
- System X Renew™ is the quick way to add HYPER Gloss & Super Slick nano protection to your vehicle, plane, or boat.
- Stand-alone super-slick ultra-hydrophobic coat repels contaminants and water helping prevent harmful water spotting.
- Use as a topper for your Professional ceramic coatings or as a depth booster that also conceals minor swirls.
- Coated surfaces clean off with ease.
- Tailored to the Automotive, Commercial Fleet, Aviation, and Marine industries.
- Fast & easy application process.
- Offers UV Protection.
- Protects surfaces for up to 6 months.
- Bead off water and contaminates like no other spray coating. System X Renew™ is a full ceramic nano-coating with superior hydrophobic properties that ACTUALLY last!
- Increase clear coat gloss levels instantly! Renew’s secondary layer of protection acts like a mirror when fully cured, reflecting light for the glossiest, deep wet look.
- System X Renew™ not only protects and slicks up your vehicles paint but also works great on wheels, glass, and other surfaces including watercrafts and even aviation applications.
- Be careful with competitors claiming to have high concentrations of SiO2. In fact, Silicon dioxide doesn’t belong as an active ingredient!
- With System X Renew™, SiO2 is formed in the chemical matrix when the siloxanes cure. And don’t think more siloxanes are better. Too much siloxane in formulation is like adding too much flour to a cake you are baking – it won’t make it better, it will make it worse.
- True to the System X brand, it’s all about balance in the formulation, to create the perfect cured product with maximum performance, regardless of cost.
How to apply:
- Wash and completely dry surfaces to be coated.
- Clean the paint using a 50% IPA (isopropyl alcohol) to water mix in a trigger sprayer. Mist the paint then wipe down with a microfiber towel.
- Wipe on coating by hand using a sponge or coating block, panel by panel. After wiping on wait 30-90 seconds to flash (depending on temp), then buff off with a microfiber towel.
- Wait 20 minutes before driving, and 4 hours before getting wet.
Note:
You can apply Renew™ in direct sun but for the best streak-free results, apply in shade on cool-to-touch surfaces.
Renew™ dries almost instantly. For the next 3 hours, Renew™ will begin a full ceramic cure. After 24 hours, the curing is complete. Avoid getting the surface wet until fully cured.
To bring rubber and soft plastic back to life, please use our System X Revive™ in our professional line.
Additional information
| Weight | 0.7 lbs |
|---|---|
| Dimensions | 2.25 × 2.25 × 10 in |
| Size | 500 ml, 8 oz |
$46.00 – $77.00