XTREME SS™

Years of Xtreme ceramic protection
Marine
  • For the ultimate Marine protection, look no further.
  • System X Xtreme Super Slick™ is tailored for extreme environments like marine applications hailing it as our best performer against friction, heat and solvents.
  • Provides an extreme gloss finish for boats and water vessels of all kinds, bringing out the full luster and sheen of your vessel’s finish.
  • Save time and preserve your vessel with Xtreme SS™ hydrophobic properties without the use of abrasive chemicals and detergents.
  • 2 layers of System X Xtreme SS™ applied on top of the vessel’s gel coat, provides constant protection with a 5 year warranty.
  • System X Xtreme SS™ harnesses the most durable ceramic technology available, registering over 9H on the industry’s hardness scale.
  • The high corrosiveness of salt, UV rays, acids, alkalies, exhaust, algae/shell, and other marine contaminants can cause structural and cosmetic damage that impair your craft’s performance and ruin its appearance.
  • Offers UV Protection for paint, gelcoat, and stainless steel to prevent unsightly damage associated with aging and fading colors.
  • The System X Xtreme SS™ gloss finish will not yellow, crack, peel, or delaminate through the year.
  • Upon application you can have the utmost confidence that your vessel will be rendered virtually immune to the adverse weathering effects of both underwater and above-water environments, conditions, and elements.
  • System X Xtreme SS™ treats surfaces like metal and gelcoat with water-resistant properties that prevent spotting and make cleaning dirt and debris fast and easy.
  • Effective for 2 years depending on environmental factors, cleaning frequency, and proper application.

How to apply:

  1. Wash and completely dry surfaces to be coated.
  2. Clean the paint using a 50% IPA (isopropyl alcohol) to water mix in a trigger sprayer. Mist the paint then wipe down with a microfiber towel.
  3. Gently shake container for 30 seconds. Apply with a Spray Gun or Wipe On. Use either a HVLP detail spray gun with .8mm tip or a siphon-fed detail spray gun with a fine to medium tip, OR wipe on coating by hand using a sponge or coating block, panel by panel. After wiping on wait 20-40 seconds to flash (depending on temp) then buff off with a microfiber towel.
  4. Wait 60 minutes before moving. Wait 48 hours before submerging in water.

Note:

System X Xtreme SS™ can be applied to the entire exterior of your vessel, except rubber and soft plastic. To bring rubber and soft plastic back to life, please use our System X Revive™.

Additional information

Weight 0.18 lbs
Dimensions 1.15 × 1.5 × 4 in
Size

20 ml, 275 ml, 65 ml

Contact Us